Mixing Veneer Plasters, Mix Imperial, Diamond base coats & finishes
Hello everyone, in this video I’m simply explaining some mixing tips and what these veneer plaster are about,
Jason Jacked up his wrist so I had to mix, (what a drag) I thought we have not shown the Imperial veneer plasters base coats being mixed and we were working on the water edge so it seamed a cool place to be mixing with the background.
Please also see our web site at http://www.StuccoPlastering.com
Kirk Giordano Plastering Inc.
Mixing Veneer Plasters, Mix Imperial, Diamond base coats & finishes
Thanks for watching and have a great day!
Home of the world’s most Popular plastering and stucco videos
Hello folks, my son Jason is also licensed as a plastering contractor, while he works with me quite a bit, he has to mix as I dislike mixing, which in turn has made him very good at the mixing aspect of our plastering trade. This is half the battle.
Suggestions for mixing?
I would suggest you apply 3 times as much sand as you do cement unless your plastering ceilings , then I would suggest 2 times as much sand as you would want the mud stickier.
Best wishes,
Kirk & Jason Giordano’s DIY plastering and stucco instructional videos
Plastering tutorials, DIY plastering networks, DIY stucco networks
Mixing Veneer Plaster video’s,
Diamond base coats and diamond veneer plaster finishes, Imperial base coast with Imperial Plaster veneer finishes, drywall compounds, shower finishes, bathroom plasters, kitchen plasters,
We cant put this vinil on driwall
Evening Juan Medina, I don't understand your question. what is vinil?
Are you referring to veneer plaster? If so why not?
best wishes,
Kirk & Jason Giordano's DIY plaster and stucco network
Kirk. I had a question can i veneer plaster on drywall with out. Puting mesh on tje joints
Howdy Jose, good question, no, no all seams must be taped. Live long and plaster Sharing plastering information
Kirk, do you think a plaster of paris and sand mix would be a good substitute for a veneer base coat? Some of these supplies are hard to find in Minnesota.
I wouldn't. Plaster of paris sets fast and is meant for things like casting molds
@Dominic Pascarella I looked it up on the material data sheet. It literally is just plaster of paris and sand. There is a little bit of clay in the mix too.
@Nipple Ripper
Have to tried this?
https://www.usg.com/content/usgcom/en/resource-center/tools/where-to-buy.html
@Nipple Ripper Paris dries in 10 minutes or less
This Diamond Veneer Finish is 80% Plaster of Paris, and 20% Lime. Hope that helps someone.