interior top coat lime plaster finishes
Hello everyone, in this simple video explanation I show how to render lime finishes on pillars.
Please also see our web site at http://www.StuccoPlastering.com
Kirk Giordano Plastering Inc.
render lime finishes
Thanks for watching and have a great day!
Kirk & Jason Giordano’s DIY plastering network
expert plastering advice, plastering guru instructions
-https://youtu.be/jI54QRx0_H0 Lime is healthy, lime is life
Lime is healthy, lime is life, interior top coat lime plaster finishes, render lime finishes, interior lime finishes on pillars
Awesome video. Some day I will do some diy applicator stuff and feel confident because I learned from the pro's. I been watchin all your videos dudes keep it up. And I agree with some of the other commenters I wouldnt mind seeing the raw footage of the the whole job.
You could set up an HD camera angled towards a wall and just briefly describe what you're doing and go to town!
Hi TehBerbDean, Jason and I feel a situation with what you ask is a long video.
I would gladly do an hour video of what I have to do, anyway.
But I might bore the crap out of folks. I will run it by my son, if he agrees to just set up the camera on a tri pod, what would you like to see completed?
Best wishes, and thanks for the comment.
Kirk Giordano Plastering
Thanks for the comment Dean. We will try to give you a video like this soon, but there are certain technical limitations with the equipment we use.
My camera cannot film longer than 12 minute clips. This is a limitation put on it by the manufacturer and I cant, or don't know how, to overcome it. Even if I could, the memory space required to film the entirety of a project like this (which took a few hours all told) is huge. Far larger than the largest SD card I could buy.
I will try to get you some videos that show more time overall of the projects, with this video we definitely could have had more time showing him spreading, but we were trying to keep it brief as there are many videos of him spreading mud.
Either way, thanks for watching and thanks for the comment!
-Jason
Nice job, Kirk… Jason can you do a vid on mixing products .. like Flex bond . TU. Ty . Pete
Thank you Jason see your in box on U tube . no hurry.
Hi Peter, Jason has mixed his share of flex-bond. Next time we mix this product, I'll try and work Jason’s camera so we can show you how we do it.
Best wishes and have a great day!
Kirk Giordano Plastering
Thank you Kirk , many formulas of different products .. as you explained .. "Binder" " "accelerator" etc.. texture's , densities , workability all interesting stuff to learn an we never stop doing that. . Have a great weekend ! Pete
Hey Peter, the list goes on and on, as fast as we learn new systems more come along. 30 years ago it was just a few traditional stucco systems. But times change and new materials and their application technique’s come along.
Fortunately I love the new stuff too.
Best wishes with your plastering projects.
Kirk Giordano plastering
Is't that the truth Kirk got to love what you do..
Funny side note
This guy as a kid got into a bag on concrete as a kid was covered in it , went home mom an her friend whom was a big concrete contractor was there . Mom said go take a bath!! , Only had thoughts of hardening solid as a brick ( Age 6) as I knew water r was what was what made the magic happen. Well this kind lady assured me I would be fine . LOL Times sure have changed Kirk but learning is great. Best Pete
Peter, too funny, thanks for sharing.
Best wishes and have groovy day!
Kirk Giordano plastering
Kirk and Jason, thank you guys for sharing your vast knowledge of plastering interior and exterior with the world. I am a contractor who owns a small construction business in Pittsburgh PA, and have learned a lot in your field from watching many of your videos over the years. Again thank you for taking the time to do this, Im sure it adds a lot to your already busy schedule. And also you have a great loving family.
Howdy Joe Dude, you my friend have a wonderful way with words, thank you,
Cheers, Live long and Plaster
Kirk and Jason giordano's teaching videos
Kirk. I am about to redo my small walk in shower and would like to use a plaster technique to do so to creat a nice white Venetian look. Do you have any videos for something like this using standard products?
Kirk Giordano plastering Inc.
wow. Thank you sir. My wife is highly allergic to mold so that's out. One more question. I have done a bunch of concrete countertops with very good success. I thought about doing a precast for the shower walls in the same manner then sealing them up. Would this still inhibit mold in the same way?
Thanks again.
Live long and plaster!
Good morning Matt, excellent question, I have also done a couple countertops and had to seal them, which is a maintenance type of adventure, so I would not recommend that option either, sorry, but remember your house your rules or option, these are my learned the hard way opinions,
FYI my granite countertops cannot be penetrated my water thus no molding.
At the risk of putting myself out of work, go with any type of tile that does not allow water in the walls.
Live long and plaster
teaching plastering video’s
@Kirk Giordano plastering Inc. Add 1/3 C per gallon of water when mixing lime plaster to stop mold growth. Love your videos!
@Kirk Giordano plastering Inc. Borax added is just as strong too. https://www.tandfonline.com/doi/full/10.1080/15583058.2017.1422570
I'm not sure why but the first thing I do when I get home from work is crack a beer and watch one of your videos
Howdy Paulzo, perhaps you are subconsciously going to get in the plastering trade. Or maybe it's the right channel to get a buzz on. Peace love and happiness to all. Plastering and repair tips for your number one investment
3000 dollar job 3 days to do.
Greetings Lord dude, I did this as a freebie as I was working on a bathroom for this fella. Let's all get plastered like stucco Kirk Giordano sound plastering advice
@Kirk Giordano plastering Inc. God bless you Sir Kirk .. Your work is thee best. The skill is top notch. I always enjoy your talent and knowledge. I can respect the high level of standards you apply and execute. Many blessings Sir Kirk. I bow in honor.
Joint compound and paint would of done the same thing
I always try not to skim with joint compound because it’s just so soft. If I have to I use durabond 90 min mud
Great work!
How long do you leave the base coat to dry? Is it completely dry?
Is it left with a texture for the following coats to adhere?
hey kirky i see you looking the other way but can you do it standing on one leg